Nova Finishing Systems, Inc.
Welcome to Nova Finishing Systems
Manufacturers of small mass finishing equipments

   Nova-Hutson Disc: Products | Prices

               Technical Articles

 

   Pictures 1 through 4 show different views of the Nova 502 HDT vibratory mil (1/2 cubic foot) with a 3-1/2"
    expandable plug dump shoot.  Please note there is a metal yardstick shown in each photo for reference

Picture 1: Nova 502 on a D2 Recirculating/Dispensing
              system showing dump shoot

Picture 2: Nova 502 on a D3 Recirculating/Dispensing
 system showing dump shoot with a 2-1/2 gallon bucket

Picture 3: Nova 502 on floor next to D2 system

Picture 4: Nova 502 on D3 showing expandable plug

                                               

           Picture 5: Shows Nova D2 & D3 systems side by side. The D2 system is 25" high
                                 and is approximately 5" higher than the D3 system at 19"
                                 A 2-1/2 gallon bucket container can fit under the dump shoot on the D3 with
                                 the machine system in place, but will not fit on the D2 system.
                   NOTE:  The work platform for the disc finishers are reinforced with 2 aluminum angles.
                                 No hole are drilled in the D3 to secure this unit, but once positioning and location is
                                 determined for the machine it is recommended that this unit be secured.

 

Picture 6: DF14 with a cover lid on D3

Picture 7: DF14 without cover lid showing gap guard

Picture 8: DF14 close up of bowl, drain and gap guard modification. (green in color)

Picture 9: DF14 dumping right

Picture 10: DF14 dumping front

Picture 11: DF14 dumping left

Picture 12: DF12

Picture 13: DF12 dumping

   

 


 

 

PO Box 185, Hatboro, PA 19040 * 1610 Republic Rd. Huntingdon Valley, PA. 19006
215-942-4474 * 800-444-4159 * Fax 215-953-1342
sales@novafinishing.com

Last Updated: April 14, 2009
Maintained by: PrecisionEagles